Electrolux washer E5B / Motor

Electrolux washer
error E5B

Washer / display referenceE5B

E5B is motor control under voltage on the Electrolux washer sheet, and the display does not show it. The sheet says to check the supply under load and the wiring to the unit. Book a technician for the power checks.

Also shown as E5B

Last reviewed

Washer / display referenceE5B
Meaning
E5B is motor control under voltage on the Electrolux washer sheet, and the display does not show it. The sheet says to check the supply under load and the wiring to the unit. Book a technician for the power checks.
Who handles it
Technician
Related codes
Source
Washer Tech Data Sheet, A11200302 (1803)

What Electrolux washer E5B means.

What it means

E5B is motor control under voltage on the Electrolux washer sheet, and the display does not show it. The sheet says to check the supply under load and the wiring to the unit. Book a technician for the power checks.

What you can safely check

If the lights dim or other appliances start when the washer runs, mention it.

When to call a technician

E5B appears with dimming lights, a warm plug or an extension cord in use.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux washer E5B: Rear of a washer with the back panel off showing the motor, belt and wiring plug, while a gloved palm holds two carbon brushes; cord unplugged
    Illustration. Follow your model’s instructions.
    Before you begin

    Note what else is on the circuit

    If the lights dim or other appliances start when the washer runs, mention it. The sheet cares about supply under load.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check the plug and outlet

    Look at the plug for scorch marks and make sure it sits tight. Do not use a loose outlet.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Skip extension cords

    A cord or power strip adds resistance and can sag the voltage to the washer.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Recall the code

    Power up, pause ten seconds, then hold the Temp and Select buttons together for a count of three to read what is stored.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    Testing voltage under load, and the motor and wiring (tests 6 and 9), is technician work.

Still showing E5B?

Send us the model and the checks you have done, and open your request here.

Book a visit

The drum drive.

Conceptual Washer sectionDrumMotorDriveControl1234
  1. 1Drum
  2. 2Motor
  3. 3Drive

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Front-load washer with the door swung open to an empty, dry stainless drum, with a console dial and panel above

Component reference

Washer motor control board (inverter)

The motor control board, the inverter, drives the drum motor on an Electrolux front-load washer.

Read the definition

A little more context.

What does E5B mean?

The voltage reaching the motor control board is too low. The sheet's next step reads check supply under load and wiring to unit, then tests 6 and 9.

Read the supporting manual

Why under load?

Voltage can look fine at rest and sag when the motor draws current. That is why the sheet specifies load.

Read the supporting manual

What are tests 6 and 9?

Test 6 is the door and lock sequence and test 9 is the motor and speed-sensor checks, both in the 2018 sheet.

Read the supporting manual

The manual behind the message.

Manufacturer document

Washer Tech Data Sheet, A11200302 (1803)

Electrolux (technician sheet; retailer-hosted copy)

A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.1 (Washer Error Codes)

Row 5B of the 2018 washer sheet; references tests 6 and 9.

Here to help

Good questions.
Clear answers.

Talk to our team
Is E5B my house wiring?

It can be. The sheet puts the supply under load first, so a loose outlet, a long cord or a shared circuit are worth ruling out.

Does E5B differ from E5C?

Yes. E5B is a low voltage reading at the motor control board and E5C is a high voltage reading at the same board.

Should an electrician look?

The sheet for E5C uses the power company or a professional; for E5B it says check supply and wiring.

What can I tell the technician?

Whether other appliances act up and how long the cord is.

Let’s take care of it.

Premium appliances deserve
careful service.