Electrolux washer E5A / Motor

Electrolux washer
error E5A

Washer / display referenceE5A

Electrolux's washer sheet prints this as 5A: high temperature on the motor control board from overload. Owners write E5A. Let the washer cool unplugged, lighten the load, and book a technician if it returns.

Also shown as E5A

Last reviewed

Washer / display referenceE5A
Meaning
Electrolux's washer sheet prints this as 5A: high temperature on the motor control board from overload. Owners write E5A. Let the washer cool unplugged, lighten the load, and book a technician if it returns.
Who handles it
Technician
Related codes
Source
Washer Tech Data Sheet, A11200302 (1803)

What Electrolux washer E5A means.

What it means

Electrolux's washer sheet prints this as 5A: high temperature on the motor control board from overload. Owners write E5A. Let the washer cool unplugged, lighten the load, and book a technician if it returns.

What you can safely check

Overheated electronics need time.

When to call a technician

E5A repeats on a normal load.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux washer E5A: Rear of a washer with the back panel off showing the motor, belt and wiring plug, while a gloved palm holds two carbon brushes; cord unplugged
    Illustration. Follow your model’s instructions.
    Before you begin

    Let it cool unplugged

    Overheated electronics need time. Unplug the washer and leave it for a good while before trying again.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check the load size

    The sheet words the cause as overload. Make sure you are washing a normal amount.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Look at airflow around the cabinet

    Clear the space behind and beside the washer so heat can escape. The sheet does not name airflow, so treat this as general care.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Recall the stored code

    Hold Temp and Select together for three seconds ten seconds after switching on, to see whether 5A is what is saved.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    Test 8 is a motor check; if E5A repeats on a light load the motor control board needs testing.

Still showing E5A?

Send us the model and the checks you have done, and open your request here.

Book a visit

The drum drive.

Conceptual Washer sectionDrumMotorDriveControl1234
  1. 1Drum
  2. 2Motor
  3. 3Drive

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Front-load washer with the door swung open to an empty, dry stainless drum, with a console dial and panel above

Component reference

Washer motor control board (inverter)

The motor control board, the inverter, drives the drum motor on an Electrolux front-load washer.

Read the definition

A little more context.

What does E5A mean?

The board that drives the motor reported a high temperature, which the sheet attributes to overload. It is printed 5A on the sheet and the display does not show it.

Read the supporting manual

Why do heavy loads matter?

The motor control works harder pushing a full drum, and the sheet names overload as the cause.

Read the supporting manual

What does the technician test?

Test 8: confirm no overload, spin the motor and tub pulleys, measure the windings against 3 to 6 ohms, then the wiring and control board.

Read the supporting manual

Is E5A the same as E5B and E5C?

No. E5B is an under-voltage reading and E5C an over-voltage one. E5A is heat.

Read the supporting manual

The manual behind the message.

Manufacturer document

Washer Tech Data Sheet, A11200302 (1803)

Electrolux (technician sheet; retailer-hosted copy)

A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.1 (Washer Error Codes)

Row 5A of the 2018 washer sheet. The sheet prints it without the E; owners write E5A.

Here to help

Good questions.
Clear answers.

Talk to our team
Why is it written 5A?

The sheet prints codes without the E. Owners write E5A.

How long should I let it cool?

The sheet gives no time, so give it a generous rest unplugged, an hour or more is a sensible, cautious choice.

Will E5A fix itself?

It may clear after cooling, but a repeat points to the motor control.

Should I keep overloading?

No. The sheet words the cause as overload, so keep to normal loads and balance bulky items such as towels around the drum.

Let’s take care of it.

Premium appliances deserve
careful service.