Electrolux washer E98 / Control board

Electrolux washer
error E98

Washer / display reference

E98 means the motor control and the main board are incompatible, according to Electrolux's 2018 washer sheet. The display does not show E98. Book a technician; the sheet checks the wiring between the two boards and then replaces boards.

Also shown as E98

Last reviewed

Washer / display reference
Meaning
E98 means the motor control and the main board are incompatible, according to Electrolux's 2018 washer sheet. The display does not show E98. Book a technician; the sheet checks the wiring between the two boards and then replaces boards.
Who handles it
Technician
Related codes
Source
Washer Tech Data Sheet, A11200302 (1803)

What Electrolux washer E98 means.

What it means

E98 means the motor control and the main board are incompatible, according to Electrolux's 2018 washer sheet. The display does not show E98. Book a technician; the sheet checks the wiring between the two boards and then replaces boards.

What you can safely check

Unplug the washer for a minute and restart it.

When to call a technician

E98 is stored again after a power cycle.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux washer E98: Front-load washer with the top cover raised, showing a green control board with wiring beside the detergent drawer; the cord lies unplugged
    Illustration. Follow your model’s instructions.
    Before you begin

    Power-cycle once

    Unplug the washer for a minute and restart it. A wrong-pair problem will come straight back.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Think about recent repairs

    E98 fits a main board or motor control board that came from a different washer. Say so if either was changed.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Retrieve the stored error

    Switch the washer on, let ten seconds pass, then press Temp and Select together and keep them down for three seconds to read what is stored.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Don't swap parts

    Boards are matched to the model. Moving one between washers creates this problem.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    Test 10 checks the wiring between the boards, then replaces the main board, then the motor control board.

Still showing E98?

Send us the model and the checks you have done, and open your request here.

Book a visit

The control and its sensors.

Conceptual Washer sectionControl panelControl boardLevel sensorMotor wiring1234
  1. 1Control panel
  2. 4Motor wiring

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

White front-load washer seen straight on, with a small silver dial and lit indicator dots on the top console, between wood cabinets

Component reference

Washer main control board

The main control board runs an Electrolux front-load washer and talks to the user interface and the motor control.

Read the definition
Front-load washer with the door swung open to an empty, dry stainless drum, with a console dial and panel above

Component reference

Washer motor control board (inverter)

The motor control board, the inverter, drives the drum motor on an Electrolux front-load washer.

Read the definition

A little more context.

What does E98 mean?

The main board and the motor control board are not a matched pair. The sheet states incompatible motor control/main board and does not show it on the display.

Read the supporting manual

Why test 10?

The sheet uses the same wiring test as the other motor-control communication rows: check the cables, then the main board, then the motor control board.

Read the supporting manual

How does E98 differ from E5D to E5F?

Those rows describe a message that failed or a board that keeps resetting. E98 says the two boards do not belong together.

Read the supporting manual

Is it safe to run?

If the washer runs normally after a reset, yes for now. A drive that stops mid-cycle with a full tub needs prompt attention.

Read the supporting manual

The manual behind the message.

Manufacturer document

Washer Tech Data Sheet, A11200302 (1803)

Electrolux (technician sheet; retailer-hosted copy)

A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.2 (Washer Error Codes)

Row 98 of the washer sheet: stored only. Test 10.

Here to help

Good questions.
Clear answers.

Talk to our team
Is E98 caused by wiring?

It can be, which is why the wiring check comes first. The wrong-pair reading is the sheet's wording for the code itself.

Does E98 appear on the screen?

No. For E98 the sheet's display column says no, so you find it through the stored-error recall.

Can I clear E98 myself?

A reset clears the message. If the boards truly do not match, the code returns.

What helps the visit?

The model number, the stored code and any history of main board or motor control board replacement, since a wrong pair is what the code reports.

Let’s take care of it.

Premium appliances deserve
careful service.