What it means
Electrolux's washer sheet reads E55 as motor under speed: the drum is turning more slowly than the control asked. It appears on select models and not on 300 series. Check for a heavy or unbalanced load first, then book a technician.
Electrolux washer E55 / Motor
Electrolux's washer sheet reads E55 as motor under speed: the drum is turning more slowly than the control asked. It appears on select models and not on 300 series. Check for a heavy or unbalanced load first, then book a technician.
Also shown as E55
Electrolux's washer sheet reads E55 as motor under speed: the drum is turning more slowly than the control asked. It appears on select models and not on 300 series. Check for a heavy or unbalanced load first, then book a technician.
Stop the washer, unplug it, and take out some of the wet laundry.
E55 shows with a small balanced load, or the drum makes scraping noises.
Your checklist, kept on this device

Stop the washer, unplug it, and take out some of the wet laundry. The sheet's next step for E55 is to check for a heavy or unbalanced load.

Spread bulky items, such as towels or a blanket, evenly around the drum so the weight does not sit on one side.

After the rearranged load, try a drain-and-spin. If E55 does not return, the load was the cause.

A scraping or rubbing sound when the drum is turned by hand, with the washer unplugged, belongs in your notes for the visit.

If E55 shows with a small, balanced load, the motor and its drive need testing. That is what test 9 does.
Send us the model and the checks you have done, and open your request here.
Book a visit
A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.
The drum motor is running below the speed the control wants. The sheet lists it as motor under speed and says it is for select models, not the 300 series.
Read the supporting manualWeight and imbalance load the motor. The sheet's own note for E55 is to check for a heavy or unbalanced load, which is the one thing an owner can change.
Read the supporting manualA technician removes the belt, spins the motor and tub pulleys by hand, checks the motor's resistance values and, if those are right, replaces the motor control board.
Read the supporting manualIf a small load finishes with no code, you can, but a washer that struggles with ordinary loads is straining its drive. Book the visit.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.1 (Washer Error Codes)
Row 55 of the 2018 washer sheet: select models only, not 300 series. Tests 9 and a load check apply.
The sheet says the code is not available on 300 series. It applies to select models above that.
No. E59 is no spin signal for 3 seconds. E55 means the drum turns, but too slowly.
The sheet names only load and the motor path. Water left in the drum adds weight, so drain first.
No, you would normally find it by recalling the stored error.
Codes, symptoms, parts and service
E57 is high current on the inverter, the motor control, in Electrolux's 2018 washer sheet. The display does not show E57. Unplug the washer, reduce an overloaded drum if you can, and book a technician for the motor tests.
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.