Electrolux washer EF1 / Washer

Electrolux washer
error EF1

We found no printed meaning for EF1 in Electrolux's washer code table, which lists fill, drain, door, motor and heating rows. Restart, look over the taps, hoses and door, and ask for a technician if the code remains.

Not explained in the manuals we reviewed

Last reviewed

EF1
Washer
Manual evidence

What the manual says about Electrolux washer EF1.

Manual evidence

We read the full washer code table on technician sheet A11200302 (2018) and the Owner Center articles for E11, E21, E35, E41, E42, HO SE, LOC and SU dS. None of them lists EF1. The nearest rows are fill (11), drain (21 to 24), door (41 to 45), motor (55 to 5F) and heating (62 to 74), and we do not borrow a meaning from them. EF1 is a vent-blocked code on Electrolux dryers, not a washer code.

Safe first steps.

  1. 1

    Read the exact message

    Record the full display text and the model number. Several of these codes also exist on other appliances, and a washer code is not the same as the dryer code with the same letters.

  2. 2

    Close the taps and look for water

    If water is on the floor or in the cabinet, turn off both taps and pull the plug once that is safe.

  3. 3

    Check the basics the sheet does cover

    Make sure the door shuts fully, the hot and cold lines are on the right inlets and the drain hose has no kinks. These are the checks Electrolux's own articles give for neighboring codes.

  4. 4

    Read the stored code

    The sheet says to press Power, wait 10 seconds, then hold Temp and Select (Set) together for 3 seconds. The display shows the last stored error.

Write these details down before you phone.

Washers in a thoughtfully designed home
  • Model and serial number
  • Full display text
  • When the message appears
  • Checks already made

When to call.

EF1 reappears after the checks.

The washer stops filling, draining or spinning, or water shows up around it.

Book a visit(844) 834-2361

The documents we checked.

Source 1

Washer Tech Data Sheet, A11200302 (1803)

Electrolux (technician sheet; retailer-hosted copy) / A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / pp.1-4 (Washer Error Codes, full table)

Source 2

Laundry front loading washer displaying Error Code E11 long fill time. (KB 1820068)

Electrolux / Owner Center knowledge base (owner.electrolux.com) / Owner Center article, cached 10.11.2026 (no edition date printed) / article text

Here to help

Good questions.
Clear answers.

Talk to our team
Does Electrolux say what EF1 means on a front-load washer?

No. The washer sheet and the articles we read do not list EF1, so any cause we gave would be invented.

How should I start when EF1 comes up?

Record the full display text and the model number. Close the taps if water is on the floor, then check that the door shuts, the hoses are on the right inlets and the drain hose has no kinks. The sheet also reads the last stored error: press Power, wait 10 seconds, then hold Temp and Select for 3 seconds.

Is EF1 the same as EF4?

We cannot say. The Electrolux washer sheet lists neither, so each has its own page and none borrows a meaning from a nearby row. Compare the display character by character.

Should I book a technician for EF1, and when?

Ask us to visit when EF1 reappears after the checks, the washer stops filling, draining or spinning, or water shows up around it.

Let’s take care of it.

Premium appliances deserve
careful service.