What it means
E41 on an Electrolux front-load washer means the control thinks the door switch is open. Check the door is fully closed, nothing is caught in it, and you hear a click. The latch and striker must work. If it persists, book a technician.
Electrolux washer E41 / Door
E41 on an Electrolux front-load washer means the control thinks the door switch is open. Check the door is fully closed, nothing is caught in it, and you hear a click. The latch and striker must work. If it persists, book a technician.
Also shown as E41
E41 on an Electrolux front-load washer means the control thinks the door switch is open. Check the door is fully closed, nothing is caught in it, and you hear a click. The latch and striker must work. If it persists, book a technician.
Push until you hear a click.
E41 returns with a clean doorway and a working click, or the door will not latch.
Your checklist, kept on this device

Push until you hear a click. A door that is only nearly shut keeps the switch open and the washer stops.

Look for a sock, a strap or lint between the door and the frame, and remove it.

Electrolux asks you to make sure the latch and striker function. The hook on the door should enter the lock cleanly.

Press Cancel, close the door again and start a short cycle to see if E41 returns.

Test 6 moves to the door lock and its wiring. That requires access behind the front panel.
Send us the model and the checks you have done, and open your request here.
Book a visit
A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Component reference
The door lock keeps the washer closed during a cycle and tells the control the door is shut.
Read the definitionThe washer's control believes the door switch is open, as the sheet puts it. E41 is on the short list of codes the display shows.
Read the supporting manualCheck the door is fully closed, nothing blocks it, and a click is heard. Then look at the latch and the striker. These are Electrolux's own four checks.
Read the supporting manualTest 6 confirms the door is closed, listens for the lock to try to engage, checks the strike, and then the wiring between the lock and the main board.
Read the supporting manualE41 says the switch reads open. E42 says the lock device is not recognized. The checks look alike, but E42 points at the lock itself.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.1 (Washer Error Codes)
Manufacturer document
Electrolux / Owner Center knowledge base (owner.electrolux.com)
Owner Center article, cached 10.11.2026 (no edition date printed) / article text
Row 41 of the 2018 front-load washer sheet (the washer sheet) and Owner Center article 1820509. The sheet lists E41 as displayed.
The switch may not close because of a worn latch, striker or something in the doorway.
Typically the cycle will not start until the control sees the door as closed.
Do not. Slamming or forcing it can bend the striker and make things worse.
The installer, within 30 days. After that, book with us.
Codes, symptoms, parts and service
E42 on an Electrolux front-load washer means the door lock is not being recognized. Make sure the door is fully closed, nothing is in the way, you hear a click, and the latch and striker work. If not, book a technician.
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.
The door lock keeps the washer closed during a cycle and tells the control the door is shut. Electrolux’s sheet lists five door codes. E41 means the board thinks the door switch is open; E42 and E43 are about the lock itself; E44 and E45 about sensing.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.