Inside the appliance
Washer door lock. In plain English.
The door lock keeps the washer closed during a cycle and tells the control the door is shut. Electrolux’s sheet lists five door codes. E41 means the board thinks the door switch is open; E42 and E43 are about the lock itself; E44 and E45 about sensing.

Where it fits.
Washer door lock in the appliance
The sheet and the articles refer to the lock, the latch and the door strike without a position. You can hear the lock click at the door when it works.
The image shows the type of component only. It does not select a replacement that fits your model.
What is different once this system needs attention.
Washer door lock concerns may show up with a drop in performance or a code that keeps returning. Testing comes first before anyone decides the component has failed.

Electrolux washer not spinning
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.

Electrolux washer detergent dispenser problems
Dispenser trouble on an Electrolux front loader usually comes from the wrong detergent, too much of it, a drawer that is not seated or buildup in the compartments. Detergent packs belong in the drum, not the drawer.
Owner care, within the model instructions.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Close it all the way
KB 1820509 and KB 1829258 start with the same checks: the door fully closed, nothing such as clothing keeping it from shutting, and a click when it latches.
- 2
Look at the latch
Both articles also say to make sure the latch and striker work properly. A bent or loose striker is something to describe when you book.
- 3
Listen for the lock
Test 6 on the sheet asks whether you can hear the lock try to close. A lock that clicks and a lock that stays silent send the technician to different parts.
- 4
Know the sound is normal
KB 1820062 lists a click when the door locks, and a double click when a lid lock engages or lets go. Neither is a sign of a problem.
Cleaning or replacement?
Leave internal testing to a technician.
Book a technician if the door will not latch with the checks done, or if E41 to E45 keep returning.
Arrange a diagnosticSources and model boundaries.
These sources back the Washer door lock guidance. Use the manual for your own model.
- Washer Tech Data Sheet, A11200302 (1803)
- Laundry front loading washer displaying Error Code E41 door is open. (KB 1820509)
- Laundry front loading washer displaying Error Code E42 door lock device failure. (KB 1829258)
- Laundry Washers Noises Guide (KB 1820062)
Follow the guide for your exact model. Consult how we research these pages.
What does E41 mean?
The control board thinks the door switch is open. Electrolux’s article tells you to check that the door is fully closed and nothing blocks it.
What does E42 mean?
The door lock is not being recognized. The sheet calls it a door lock device failure, and KB 1829258 gives the same closed-door, click and latch checks as E41.
What do E43, E44 and E45 mean?
The sheet prints door lock triac failure, door closed sensing failure and line door sensing failure. All three share Test 6.
What does a technician do on Test 6?
With the door shut, they listen for the lock to try closing. If it does, the strike is checked and the lock replaced if the strike is good. If not, wiring to the main board is checked first.
Codes, symptoms, parts and service
Link the message to what to do next.
E41
E41 on an Electrolux front-load washer means the control thinks the door switch is open. Check the door is fully closed, nothing is caught in it, and you hear a click. The latch and striker must work. If it persists, book a technician.
Electrolux washer not spinning
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.
Washer repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.

