What it means
E42 on an Electrolux front-load washer means the door lock is not being recognized. Make sure the door is fully closed, nothing is in the way, you hear a click, and the latch and striker work. If not, book a technician.
Electrolux washer E42 / Door
E42 on an Electrolux front-load washer means the door lock is not being recognized. Make sure the door is fully closed, nothing is in the way, you hear a click, and the latch and striker work. If not, book a technician.
Also shown as E42
E42 on an Electrolux front-load washer means the door lock is not being recognized. Make sure the door is fully closed, nothing is in the way, you hear a click, and the latch and striker work. If not, book a technician.
Close it firmly and listen.
The latch does not click, E42 returns, or the door lock looks damaged.
Your checklist, kept on this device

Close it firmly and listen. A silent latch means the hook is not reaching the lock.

Check the door seal, the frame and the latch area for clothing, lint or debris that stops the door seating, and clear it with the washer unplugged.

The article asks that both are functioning properly. A bent or loose striker keeps the lock from engaging.

Press Cancel or switch the washer off, close the door again and restart a short cycle.

If the lock still fails to register, the sheet's test replaces the lock and then looks at wiring and board.
Send us the model and the checks you have done, and open your request here.
Book a visit
A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Component reference
The door lock keeps the washer closed during a cycle and tells the control the door is shut.
Read the definitionThe control is not recognizing the door lock device, so it cannot confirm the door is locked. Electrolux phrases it door lock device failure.
Read the supporting manualClosed door, nothing in the way, an audible click, and a working latch and striker. They are the same four checks listed for E41.
Read the supporting manualTest 6: listen for the lock to try to close, check the strike, check the wiring from the lock to the main board, then replace the lock and the board.
Read the supporting manualThe door lock keeps the door shut while the drum turns. Never override it, and do not open the door during a cycle.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.1 (Washer Error Codes)
Manufacturer document
Electrolux / Owner Center knowledge base (owner.electrolux.com)
Owner Center article, cached 10.11.2026 (no edition date printed) / article text
Row 42 of the 2018 front-load washer sheet (the washer sheet) and Owner Center article 1829258, covering front-load washers.
The control relies on the lock's electrical signal, not on how the door looks. A lock that does not report back is treated as not locked.
For E42 the sheet's display column says no, though Electrolux has a dedicated article on it.
No. The lock is a safety feature that stops the drum turning with the door open, so never defeat it to finish a cycle.
Electrolux's article sends you to your installer in the first 30 days after installation. After that window, book a visit with us.
Codes, symptoms, parts and service
E41 on an Electrolux front-load washer means the control thinks the door switch is open. Check the door is fully closed, nothing is caught in it, and you hear a click. The latch and striker must work. If it persists, book a technician.
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.
The door lock keeps the washer closed during a cycle and tells the control the door is shut. Electrolux’s sheet lists five door codes. E41 means the board thinks the door switch is open; E42 and E43 are about the lock itself; E44 and E45 about sensing.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.