Electrolux washer F9 / Water supply

Electrolux washer
error F9

Washer / display reference

F9 is a hot valve warning on Electrolux's 2018 washer sheet: the hot and cold water hoses are reversed. The sheet says to switch the hoses to reduce water-temperature problems. The display does not show F9. Close the taps before you swap them.

Also shown as F9

Last reviewed

Washer / display reference
Meaning
F9 is a hot valve warning on Electrolux's 2018 washer sheet: the hot and cold water hoses are reversed. The sheet says to switch the hoses to reduce water-temperature problems. The display does not show F9. Close the taps before you swap them.
Who handles it
Owner checks first, then a technician
Related codes
Source
Washer Tech Data Sheet, A11200302 (1803)

What Electrolux washer F9 means.

What it means

F9 is a hot valve warning on Electrolux's 2018 washer sheet: the hot and cold water hoses are reversed. The sheet says to switch the hoses to reduce water-temperature problems. The display does not show F9. Close the taps before you swap them.

What you can safely check

Shut both water supply taps before touching a hose.

When to call a technician

F9 returns with correct hoses and a hot supply that is actually hot.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux washer F9: Hand pointing at a red-handled shut-off valve on a tiled wall, with two braided hoses running to the red and blue inlets on the back of a washer
    Illustration. Follow your model’s instructions.
    Before you begin

    Turn both taps off

    Shut both water supply taps before touching a hose. Wet connections under pressure spray.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Swap the hoses

    Hot supply to the hot inlet, cold to the cold. Hand-tighten each coupling on its washer and check the rubber washer is seated.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Check the hot water at the house

    If the hoses are right but the hot water is only as warm as the cold, the sheet's second step is to fix the hot supply at the house.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Open the taps and look for drips

    Turn each tap on slowly and check both ends of each hose for leaks.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    If F9 returns with the hoses correct, tell us the model and the temperature of your hot water.

Still showing F9?

Send us the model and the checks you have done, and open your request here.

Book a visit

Water into the washer.

Conceptual Washer sectionSupply valveInlet hoseTub inlet123
  1. 1Supply valve
  2. 2Inlet hose
  3. 3Tub inlet

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

A little more context.

What does F9 mean?

The washer sees cold water where hot should be. The sheet words it hot valve warning, hot water and cold water hoses reversed, and its next step is to reverse them.

Read the supporting manual

How do I tell hot from cold?

Follow each hose back to its tap. The tap marked H or red supplies hot, and the inlet on the washer is also marked.

Read the supporting manual

What if the hoses are right?

Test 16 asks whether the hot water is about the same temperature as the cold. If so, the problem is the hot water supply in the house.

Read the supporting manual

How is F9 different from HO SE?

HO SE is the alert from the Owner Center article that shows when reversed hoses are detected. F9 is the sheet's name for the same idea.

Read the supporting manual

The manual behind the message.

Manufacturer document

Washer Tech Data Sheet, A11200302 (1803)

Electrolux (technician sheet; retailer-hosted copy)

A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.2 (Washer Error Codes)

Row F9 of the washer sheet: stored only; test 16 covers reversed hoses and the house hot supply.

Here to help

Good questions.
Clear answers.

Talk to our team
Is F9 dangerous?

No. It is a warning about water temperature, not an electrical alarm.

Will my clothes still be washed?

They may be washed at the wrong temperature, which is why the sheet wants the hoses reversed.

Does F9 show on the display?

No. The sheet marks F9 as not shown, so the first sign is water at the wrong temperature, and the stored error confirms it.

Who swaps the hoses?

You can, with the taps off. If the washer was installed in the past 30 days, the installer should correct it.

Let’s take care of it.

Premium appliances deserve
careful service.