Inside the appliance

Disposer knockout plug. In plain English.

The knockout plug is a blank that seals the garbage disposer inlet until it is removed, which has to happen when the dishwasher drains through a disposer. Electrolux lists it first when the dishwasher shows i20 (unit did not drain properly).

Last reviewed

Hand using a flat screwdriver to pry the round plug from the side inlet of a garbage disposer, power cord unplugged on the cabinet floor
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Disposer knockout plug in the appliance

It sits in the disposer inlet where the drain hose connects. The article does not describe it any further.

The image shows the type of component only. It does not select a replacement that fits your model.

Owner care, within the model instructions.

Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.

  1. 1

    Look for the plug

    KB 1830367 puts it first on the i20 list: confirm the knockout plug has been taken out of the disposer.

  2. 2

    Then check the hose

    Next on the list are a blocked hose, a pinched hose and a height of at least 32 inches.

  3. 3

    Then the glass trap

    Finish with the glass trap or filter, which has to be free of leftover food.

  4. 4

    Mention it when you book

    If the dishwasher or disposer was fitted recently, tell us. The article gives no removal steps, and we will not invent any here.

Cleaning or replacement?

Leave internal testing to a technician.

Book a technician if i20 shows on a new installation and the plug check does not help.

Book a technician if the disposer inlet needs work you are not comfortable doing.

Arrange a diagnostic

Sources and model boundaries.

These sources back the Disposer knockout plug guidance. Use the manual for your own model.

  • Dishwasher Error Code i20 - Unit did not drain properly (KB 1830367)

Follow the guide for your exact model. Consult how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What is a knockout plug?

A small plug fitted in the disposer inlet. The article says it has to come out for the dishwasher to drain into the disposer.

Does every dishwasher need it removed?

Only when the drain runs into a disposer. Electrolux does not cover other setups in this article.

Is it the first thing to check for i20?

Yes, it heads the list, before the hose and the glass trap.

How do I remove the plug?

The article gives no removal steps. Keep power to the disposer off and your hands out of it, and book a visit if you are unsure.

Let’s take care of it.

Premium appliances deserve
careful service.