Inside the appliance
Glass trap and filter. In plain English.
The glass trap and filter collect food soil before the drain. Electrolux ties both i20 and i40 to them: i40 is printed as a clogged filter or sump, caused by food residue that has collected, and i20 lists the glass trap among the things to clear.

Where it fits.
Glass trap and filter in the appliance
The articles point to the glass trap and the sump without a position. Your owner’s manual shows where to lift the trap out.
The image shows the type of component only. It does not select a replacement that fits your model.
What is different once this system needs attention.
Glass trap and filter concerns may show up with a drop in performance or a code that keeps returning. Testing comes first before anyone decides the component has failed.

Electrolux dishwasher lights flashing or showing a code
Flashing lights and display codes on an Electrolux dishwasher are not always a breakdown. A delay countdown (01-24) and a heat delay (Hd or HO) are normal waiting states, while i20 and i40 point to draining and a clogged filter or sump.

Electrolux dishwasher will not start
A dishwasher that seems idle may be waiting. A delayed start (01-24) holds the cycle until the countdown reaches 0, and a heat delay (Hd or HO) pauses while the water warms. Check these before looking for a failure.
Owner care, within the model instructions.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Clean out the glass trap
For i40, KB 1831281 says to empty the glass trap and then run another cycle.
- 2
Look for food soil
The i20 article asks you to make sure the trap or filter is clear of any leftover food.
- 3
Run again
Run a cycle once the trap is clean. If the code was a one-off, it will not come back.
- 4
Reset if needed
Hold Cancel, cut power at the breaker, or leave the dishwasher unplugged for 3 minutes, as KB 1830367 lists.
Cleaning or replacement?
Leave internal testing to a technician.
Book a technician if i40 or i20 returns on the next run with a clean trap.
Book a technician if the sump holds standing water you cannot clear.
Arrange a diagnosticSources and model boundaries.
These sources back the Glass trap and filter guidance. Use the manual for your own model.
- Dishwasher Error Code i40 - Clogged filter or sump (KB 1831281)
- Dishwasher Error Code i20 - Unit did not drain properly (KB 1830367)
Follow the guide for your exact model. Consult how we research these pages.
What does i40 mean?
The printed meaning is a clogged filter or sump. Electrolux blames food residue collecting there.
What do I do first for i40?
Empty the glass trap, then run the dishwasher again.
Does the glass trap matter for i20?
Yes. It is the last item on the i20 list, after the knockout plug and the drain hose.
Does the dishwasher keep draining badly after cleaning?
Then the hose or something deeper in the drain path may be the cause, and it is time to book a visit.
Codes, symptoms, parts and service
Link the message to what to do next.
Electrolux dishwasher lights flashing or showing a code
Flashing lights and display codes on an Electrolux dishwasher are not always a breakdown. A delay countdown (01-24) and a heat delay (Hd or HO) are normal waiting states, while i20 and i40 point to draining and a clogged filter or sump.
Dishwasher repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.

