Inside the appliance
Surface indicator lights. In plain English.
An Electrolux range can carry two surface lights. Element on glows while any surface control is on. Hot surface outlasts the cooking and stays lit until the glass is only warm, which the article calls a moderate level. Neither is an error signal.

Where it fits.
Surface indicator lights in the appliance
Both lights are usually on the display panel, per KB 1847370.
The image shows the type of component only. It does not select a replacement that fits your model.
What is different once this system needs attention.
Surface indicator lights concerns may show up with a drop in performance or a code that keeps returning. Testing comes first before anyone decides the component has failed.

Electrolux range surface burner not heating
For a surface element that stays cold, the check depends on the cooktop type. On coil burners, test the safety switch and move the coil to another receptacle. On glass, cut the range's power for 30 seconds. On induction, use cookware a magnet sticks to.

Electrolux range door lock error or locked controls
If the range door refuses to open, or F90 to F94 shows, Electrolux wants power off for up to half a minute, using the plug or the breaker. First rule out the Lock feature, which also secures the door.
Owner care, within the model instructions.
Power the appliance down and pull the plug before any owner check. Beware of standing water and sharp debris. Never touch a wet plug or electrical area, take off service panels, or step beyond your model’s owner guide.
- 1
Read element on
It is usually on the display panel and lights when an element is on. A glance after cooking shows if every control is off.
- 2
Read hot surface
It comes on as any cooking area heats up and stays lit until the glass has cooled somewhat.
- 3
Treat a lit light as hot
The hot-surface light outlasts the cooking, even after every control is off.
- 4
Use the manual
The article sends you to the Before You Call section of your owner’s manual if the lights misbehave.
Cleaning or replacement?
Leave internal testing to a technician.
Book a technician if a light stays on with the glass cold and all controls off.
Book a technician if a light never comes on while an element heats.
Arrange a diagnosticSources and model boundaries.
These sources back the Surface indicator lights guidance. Use the manual for your own model.
- Ranges - What do the indicator lights on my range mean? (KB 1847370)
- Ranges - Why does my surface element appear to go on and off on my ceramic glass cooktop? (KB 1847475)
Follow the guide for your exact model. Consult how we research these pages.
What does the element on light mean?
A surface control is on. Check it after cooking to be sure everything is off.
What does the hot surface light mean?
A cooking area has heated up and the glass has not yet cooled down.
Are these lights error codes?
No. They are status lights, not codes.
Does every range have both?
The article says your range may have either or both.
Codes, symptoms, parts and service
Link the message to what to do next.
Electrolux range surface burner not heating
For a surface element that stays cold, the check depends on the cooktop type. On coil burners, test the safety switch and move the coil to another receptacle. On glass, cut the range's power for 30 seconds. On induction, use cookware a magnet sticks to.
Range repair
Book a diagnostic for your model at the appliance.
Find your metro
Office details and the access information to pass on.

