What it means
E 4 is a failed humidity sensor in Electrolux's Owner Center dryer guide. The dryer finishes the cycle it is on and manual cycles still work. If E 4 keeps showing, schedule service.
Electrolux dryer E 4 / Humidity sensor
E 4 is a failed humidity sensor in Electrolux's Owner Center dryer guide. The dryer finishes the cycle it is on and manual cycles still work. If E 4 keeps showing, schedule service.
Also shown as E 4
E 4 is a failed humidity sensor in Electrolux's Owner Center dryer guide. The dryer finishes the cycle it is on and manual cycles still work. If E 4 keeps showing, schedule service.
The guide says the dryer completes the cycle it is on.
E 4 shows on every automatic cycle.
Your checklist, kept on this device

The guide says the dryer completes the cycle it is on. Let it run out rather than canceling.

Timed or manual cycles do not depend on the humidity reading, so you can keep drying while you wait.

Lint on the screen slows drying and hides the real effect of a failing sensor, so empty it after every load. [2]

Electrolux says softener-sheet residue on the moisture sensor bars stops them sensing wet clothes, and a cloth with rubbing alcohol clears it. The guide does not say these are the same sensor as E 4, so treat this as a general step. [2]
The guide wants service arranged when the code persists.
Send us the model and the checks you have done, and open your request here.
Book a visit


A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Component reference
The lint screen, also called the lint filter, catches lint from the air leaving an Electrolux dryer.
Read the definitionThe dryer's humidity sensor has failed. Electrolux's Owner Center guide lists E 4 under error codes and says humidity sensor failed.
Read the supporting manualYes. The guide says the dryer completes the current cycle and you can still run manual cycles.
Read the supporting manualNo. The guide treats it as a service item only if the code continues. There is no heat or fire warning attached to it.
Read the supporting manualE31 and E32 are readings from a contact sensor on the technician chart. E 4 is the Owner Center's owner-level message. They are separate entries.
Read the supporting manualManufacturer document
Electrolux / Owner Center knowledge base (owner.electrolux.com)
Owner Center article, cached 10.11.2026 (no edition date printed) / article text
Manufacturer document
Electrolux / Owner Center knowledge base (owner.electrolux.com)
Owner Center article, cached 10.11.2026 (no edition date printed) / article text
Electrolux Owner Center dryer guide (KB 1820071), written for dryers in general. The cleaning step comes from the extended drying time article (KB 1853008).
Without a working humidity sensor, automatic cycles cannot judge dryness. The guide does not describe the symptom, so choose a timed cycle.
No. The refrigerator code is a separate entry for a different appliance.
The guide only says to schedule service. A technician decides what to replace.
For E 4, the model number, whether E 4 shows on every automatic cycle and whether timed cycles dry well.
Codes, symptoms, parts and service
Most dryer noise has a simple source: coins or buckles in the drum, a loose pedestal, shipping bolts still in place or a dryer that is out of level. Electrolux also lists sounds that are normal, such as the chime at the end of a cycle.
The lint screen, also called the lint filter, catches lint from the air leaving an Electrolux dryer. Electrolux says to clean it before or after each load, because buildup blocks airflow and hurts drying. An EF1 code is the dryer's ventilation blockage message, and the lint filter is the first place its guide says to look.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.