Electrolux dryer E42 / Door

Electrolux dryer
error E42

Dryer / display reference

E42 appears in two Electrolux documents with two readings. The Owner Center guide shows E 42 as Door Open; the technician chart says door sensing failure with a defective control board. Close the door and clear the doorway; if E42 stays, book a visit.

Also shown as E42

Last reviewed

Dryer / display reference
Meaning
E42 appears in two Electrolux documents with two readings. The Owner Center guide shows E 42 as Door Open; the technician chart says door sensing failure with a defective control board. Close the door and clear the doorway; if E42 stays, book a visit.
Who handles it
Owner checks first, then a technician
Related codes
Source
Dryer Tech Data Sheet, P/N 137265000B (1202)

What Electrolux dryer E42 means.

What it means

E42 appears in two Electrolux documents with two readings. The Owner Center guide shows E 42 as Door Open; the technician chart says door sensing failure with a defective control board. Close the door and clear the doorway; if E42 stays, book a visit.

What you can safely check

The Owner Center guide says to make sure the door is not blocked and is fully closed.

When to call a technician

E42 stays with the door shut and clear.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux dryer E42: Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Close the door fully

    The Owner Center guide says to make sure the door is not blocked and is fully closed. Push until it seats.

  2. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 2

    Clear the doorway

    Check for a sleeve, a sock or lint between the door and the frame, and remove it.

  3. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 3

    Look at the door catch

    With the dryer unplugged, check that the latch and the catch are intact and nothing is bent.

  4. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 4

    Restart a short cycle

    Plug in and run a timed cycle to see whether E42 returns.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    If the door is closed and clear but E42 stays, the chart's solution is to replace the electronic control board.

Still showing E42?

Send us the model and the checks you have done, and open your request here.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 3Drum

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Front-load dryer control console with a steel dial, lit bar and dot indicators, and a row of five buttons above the round glass door

Component reference

Dryer electronic control board and interface board

The dryer electronic control board is the main board of an Electrolux front-load dryer, and the interface board is the console board that talks to it.

Read the definition

A little more context.

What does E42 mean?

Two readings exist. The Owner Center guide lists E 42 as door open. The technician chart lists E42 as door sensing failure, from a defective control board.

Read the supporting manual

Which reading applies to my dryer?

If the door was ajar or blocked and closing it clears the code, you had the Owner Center case. If E42 stays with a closed door, the chart's board case is likely.

Read the supporting manual

What does the chart say to do?

Replace the electronic control board. That is the only solution on the E42 row.

Read the supporting manual

Is E42 dangerous?

No heat or fire issue is named, but the dryer will not run properly if it cannot sense the door.

Read the supporting manual

The manual behind the message.

Manufacturer document

Dryer Tech Data Sheet, P/N 137265000B (1202)

Electrolux (technician sheet; retailer-hosted copy)

P/N 137265000B (1202); Canadian SKU EIMED6CJIW; original file dated 2009 / sheet p.1 (Error Code Chart)

Manufacturer document

Laundry Dryer Error Code Guide (KB 1820071)

Electrolux / Owner Center knowledge base (owner.electrolux.com)

Owner Center article, cached 10.11.2026 (no edition date printed) / article text

Two Electrolux documents, with different readings: row E42 of the dryer chart and the Owner Center dryer guide (KB 1820071).

Here to help

Good questions.
Clear answers.

Talk to our team
Why does my dryer say door open when the door is shut?

The sensing circuit may not be reading the door. That is the chart's door sensing failure, tied to the control board.

Can I defeat the door switch?

No. It is a safety feature, and bypassing it is dangerous.

Why does the control board come into E42?

The technician chart blames a defective electronic control board for E42 and replaces it. The Owner Center guide treats it as a plain open door instead.

What helps the visit?

The model number and whether closing the door firmly clears the code.

Let’s take care of it.

Premium appliances deserve
careful service.