Electrolux dryer EA4 / Power supply

Electrolux dryer
error EA4

Dryer / display referenceEA4

EA4 means improper home wiring, per Electrolux's dryer chart: the L1, N and L2 conductors may be wired incorrectly at the terminal block. The chart's step is to check the wiring there. This is installer or electrician work; book a technician.

Also shown as EA4

Last reviewed

Dryer / display referenceEA4
Meaning
EA4 means improper home wiring, per Electrolux's dryer chart: the L1, N and L2 conductors may be wired incorrectly at the terminal block. The chart's step is to check the wiring there. This is installer or electrician work; book a technician.
Who handles it
Technician — close the water supply
Related codes
Source
Dryer Tech Data Sheet, P/N 137265000B (1202)

What Electrolux dryer EA4 means.

What it means

EA4 means improper home wiring, per Electrolux's dryer chart: the L1, N and L2 conductors may be wired incorrectly at the terminal block. The chart's step is to check the wiring there. This is installer or electrician work; book a technician.

What you can safely check

Disconnect power.

When to call a technician

EA4 appears on a newly installed or moved dryer.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux dryer EA4: Hand gripping a heavy black dryer cord plug seated in a steel-plated wall receptacle, with a closed gray breaker panel on the wall behind.
    Illustration. Follow your model’s instructions.
    Before you begin

    Unplug the dryer

    Disconnect power. Do not open the terminal block yourself.

  2. Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Note when it started

    EA4 right after installation or a move points to the connection.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Ask the installer

    Electrolux's guide calls similar wiring codes known installation issues and points to the installer. [2]

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Check the cord and outlet type

    A 3-wire or 4-wire cord must match the outlet; mention what you have.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    The chart checks the wiring at the terminal block for L1-N-L2 wired incorrectly.

Still showing EA4?

Send us the model and the checks you have done, and open your request here.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 3Drum

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

A little more context.

What does EA4 mean?

The dryer senses that its supply connections are wrong. The chart reads improper home wiring, with line connections, wiring or the control board as conditions.

Read the supporting manual

What do L1, N and L2 mean?

L1 and L2 are the two hot legs of a 240-volt supply and N is the neutral. Swapping them at the terminal block is the mistake the chart names.

Read the supporting manual

Who should fix EA4?

The installer for a new dryer, or a technician. Electrolux's H4/B4 entry calls incorrect wiring a known installation issue.

Read the supporting manual

The manual behind the message.

Manufacturer document

Dryer Tech Data Sheet, P/N 137265000B (1202)

Electrolux (technician sheet; retailer-hosted copy)

P/N 137265000B (1202); Canadian SKU EIMED6CJIW; original file dated 2009 / sheet p.2 (Error Code Chart)

Manufacturer document

Laundry Dryer Error Code Guide (KB 1820071)

Electrolux / Owner Center knowledge base (owner.electrolux.com)

Owner Center article, cached 10.11.2026 (no edition date printed) / article text

Row EA4 of the dryer chart, page 2, and the Owner Center dryer guide for the installation-issue note.

Here to help

Good questions.
Clear answers.

Talk to our team
Is EA4 the same as H4/B4?

The Owner Center lists H4/B4 as incorrect wiring on dryers, while EA4 is the chart's improper home wiring. They look alike but come from different documents.

Can I rewire the dryer?

No. Terminal block work should be done by a qualified person with the power off.

Is the outlet wrong or the dryer?

The chart lists line connections in the home, wiring or the control board.

Before booking EA4, what helps?

For EA4, the model number, the type of cord and outlet, and when the dryer was installed or last moved.

Let’s take care of it.

Premium appliances deserve
careful service.