What it means
EF8 means a key is stuck on Electrolux's dryer chart. A console button or the interface board is reporting a press that does not end. Check that no button is jammed, power-cycle once, and book a technician if it returns.
Electrolux dryer EF8 / Control board
EF8 means a key is stuck on Electrolux's dryer chart. A console button or the interface board is reporting a press that does not end. Check that no button is jammed, power-cycle once, and book a technician if it returns.
Also shown as EF8
EF8 means a key is stuck on Electrolux's dryer chart. A console button or the interface board is reporting a press that does not end. Check that no button is jammed, power-cycle once, and book a technician if it returns.
Press and release each key on the panel.
EF8 returns with no stuck button.
Your checklist, kept on this device

Press and release each key on the panel. Any that stays down or feels sticky is the likely cause.

With the dryer unplugged, wipe the panel dry. Spills and sticky residue can hold a key down.

Unplug for a minute and plug in again, without touching the panel.

The console snaps onto the interface board; prying can break it.

The chart checks that buttons activate when pressed, then replaces the console or the interface board.
Send us the model and the checks you have done, and open your request here.
Book a visitA simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Component reference
The dryer electronic control board is the main board of an Electrolux front-load dryer, and the interface board is the console board that talks to it.
Read the definitionThe control thinks a key is held down. The chart reads key stuck, with the console button or the interface board defective.
Read the supporting manualWhether any button is physically stuck. The chart's step is to check that the buttons activate when pressed, which is the part you can see.
Read the supporting manualReplace the console or the interface board as appropriate.
Read the supporting manualProbably not reliably, since the control keeps seeing a press.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
P/N 137265000B (1202); Canadian SKU EIMED6CJIW; original file dated 2009 / sheet p.2 (Error Code Chart)
Row EF8 of the dryer chart, page 2.
The chart names no moisture. A wet or sticky panel is still a plausible cause.
The code does not say. Look for the one that sits lower than the others.
E91 is a communication error between the boards. Both involve the interface board.
For EF8, the model number and which button looks affected, for example one that sits lower than the rest or feels sticky.
Codes, symptoms, parts and service
E91 is a communication error between the dryer's control board and its interface board, per Electrolux's dryer chart. The cause is the wiring, the control board or the interface board. Restart once, then book a technician.
Most dryer noise has a simple source: coins or buckles in the drum, a loose pedestal, shipping bolts still in place or a dryer that is out of level. Electrolux also lists sounds that are normal, such as the chime at the end of a cycle.
The dryer electronic control board is the main board of an Electrolux front-load dryer, and the interface board is the console board that talks to it. Electrolux's dryer chart names the control board for E54, E67, E94, E97 and EA5, and the pair for E91 to E93. Owners can restart the dryer once; board work is for a technician.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.