What it means
F102 comes from Electrolux's UK and Australian support pages, and no US Electrolux document we found lists it. Those pages describe a door lock sensor problem: close the door fully, disconnect power for a few minutes and try again.
Electrolux oven F102 / Door lock
F102 comes from Electrolux's UK and Australian support pages, and no US Electrolux document we found lists it. Those pages describe a door lock sensor problem: close the door fully, disconnect power for a few minutes and try again.
Also shown as F102
F102 comes from Electrolux's UK and Australian support pages, and no US Electrolux document we found lists it. Those pages describe a door lock sensor problem: close the door fully, disconnect power for a few minutes and try again.
Both regional pages put a door not fully closed first.
F102 returns after the door is closed and power reset.
Your checklist, kept on this device

Both regional pages put a door not fully closed first.

Isolate the oven at the mains or the house breaker for at least 30 seconds. The UK page says a few minutes, the Australian page at least 30 seconds.

Turn the oven back on and check that functions can be set.

These pages describe European and Australian built-in ovens. Compare your model number with the sheets for US models.

If F102 returns after the reset, tell us the model number and where the oven was bought.
Send us the model and the checks you have done, and open your request here.
Book a visit
A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.
The regional pages describe it as a door lock sensor problem. The Australian page says F101 or F102, door lock sensor problem, and the oven cannot set any functions.
Read the supporting manualCheck the door is fully closed, restart the appliance by disconnecting it for at least 30 seconds, and arrange service if that does not help.
Read the supporting manualWe found no US document that lists it. The US technician sheets we hold list F90 to F97 for door locks instead.
Read the supporting manualTreat it as a door lock issue and follow the safe steps. Do not assume it matches a US row.
Read the supporting manualManufacturer document
Electrolux Australia (supporthub.electrolux.com.au), region: Australia
Owner Center article, cached 10.11.2026 (no edition date printed) / article text
Manufacturer document
Electrolux UK (support.electrolux.co.uk), region: United Kingdom
Owner Center article, cached 10.11.2026 (no edition date printed) / article text
Electrolux UK and Australian support pages only; no US document lists F102. The US sheets for door locks print F90 to F97.
We cannot say. F90 is a door motor mechanism failure on US ovens, and no document links the two.
Electrolux sells different ovens in different markets, and the sources for F102 are not US ones.
The Australian page says the oven cannot set any functions with F101 or F102.
For F102, the model number, where the oven was purchased and whether the door closes fully.
Codes, symptoms, parts and service
The written Electrolux articles say little about setting the clock or timer, since its display-settings guide is a video. What they do cover is a display or keypad that acts up: a stuck key (F11), memory and cable errors (F13, F14, F15), Demo mode and a power reset.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.