Electrolux washer E23 / Drain

Electrolux washer
error E23

Washer / display reference

E23 on an Electrolux front-load washer is a drain triac error on the technician sheet. The display does not show E23. Owners can check the drain hose, but the sheet's next steps are electrical, so book a technician if the washer will not drain.

Also shown as E23

Last reviewed

Washer / display reference
Meaning
E23 on an Electrolux front-load washer is a drain triac error on the technician sheet. The display does not show E23. Owners can check the drain hose, but the sheet's next steps are electrical, so book a technician if the washer will not drain.
Who handles it
Technician
Related codes
Source
Washer Tech Data Sheet, A11200302 (1803)

What Electrolux washer E23 means.

What it means

E23 on an Electrolux front-load washer is a drain triac error on the technician sheet. The display does not show E23. Owners can check the drain hose, but the sheet's next steps are electrical, so book a technician if the washer will not drain.

What you can safely check

Test 3 starts with the hose, so look for kinks or a blockage.

When to call a technician

The tub holds water after a cycle, or E23 is stored again after you read it.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux washer E23: Gloved hand holding the drain pump filter and cap beside the open lower access panel of a washer, with a metal baking tray on a towel on the floor
    Illustration. Follow your model’s instructions.
    Before you begin

    Check the drain hose

    Test 3 starts with the hose, so look for kinks or a blockage. A restricted hose is easy to rule in or out in two minutes.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Note how the washer behaves

    Does it fill, wash and then sit full of water, or stop earlier? That detail separates a pump-out problem from a board problem.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Read the stored code

    Power up, pause ten seconds, then hold the Temp and Select buttons together for a count of three to see the last error stored. A repeat of E23 is useful information for the visit.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Keep hands away from the pump

    The pump is on the control board's output at 120 volts. Unplug the washer before any panel comes off, and leave pump wiring to a technician.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    Checking the pump's supply and replacing a pump or board are technician jobs. Give us the model and the stored code when you call.

Still showing E23?

Send us the model and the checks you have done, and open your request here.

Book a visit

The washer drain path.

Conceptual Washer sectionPump filterDrain pumpDrain hoseHousehold drain1234
  1. 1Pump filter
  2. 3Drain hose
  3. 4Household drain

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

A little more context.

What is a drain triac error?

A triac is the electronic switch on the control board that powers the drain pump. E23 means the control reports a problem with that switching, as the sheet puts it.

Read the supporting manual

What does the sheet do about E23?

Test 3 checks the hose, then starts the washer and looks for 120 VAC at the pump. With none, it checks the wiring and then the main board; with voltage, it looks at the pump for a blockage.

Read the supporting manual

How is E23 different from E24?

E24 is drain triac sensing, meaning the control cannot confirm what the switch is doing. Both share the same test, and neither is the slow-drain row, which is E21.

Read the supporting manual

Can the washer still be used?

If it drains normally after a restart, you can finish a load, but a repeat E23 means the pump may not be getting reliable power. Stop and book a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

Washer Tech Data Sheet, A11200302 (1803)

Electrolux (technician sheet; retailer-hosted copy)

A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.1 (Washer Error Codes)

Row 23 of the 2018 front-load washer sheet (the washer sheet), which lists it with E21 and E24 under test 3. It is not a displayed code.

Here to help

Good questions.
Clear answers.

Talk to our team
Why does the display not show E23?

For E23 the sheet's display column says no. It is meant for the technician, who recalls it from memory.

Is E23 a leak or a drain blockage?

Neither. It is an electrical row about the pump's switch, though a blocked pump can be found during the same test.

Will unplugging the washer clear E23?

It clears the message, not the cause. If the drain output is still wrong the code will be stored again.

What do I tell the technician about E23?

The model number, whether the tub holds water, and whether E21 has also appeared.

Let’s take care of it.

Premium appliances deserve
careful service.