What it means
E87 is a user interface micro-controller problem on Electrolux's 2018 washer sheet. The display does not show E87. Cycle the power once; if it returns, book a technician for the interface and main board test.
Electrolux washer E87 / Control board
E87 is a user interface micro-controller problem on Electrolux's 2018 washer sheet. The display does not show E87. Cycle the power once; if it returns, book a technician for the interface and main board test.
Also shown as E87
E87 is a user interface micro-controller problem on Electrolux's 2018 washer sheet. The display does not show E87. Cycle the power once; if it returns, book a technician for the interface and main board test.
Unplug for a minute and plug back in.
E87 recurs.
Your checklist, kept on this device

Unplug for a minute and plug back in. A one-off processor hiccup may clear.

Look for moisture or a cracked panel, and press each key.

Switch the washer on, let ten seconds pass, then press Temp and Select together and keep them down for three seconds.

The interface board is behind the panel and static-sensitive.

Test 11 checks board-to-board wiring, then replaces the interface board and, if needed, the main board.
Send us the model and the checks you have done, and open your request here.
Book a visit

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.
The microprocessor on the user interface board reported a problem. The sheet wording is user interface micro-controller problem.
Read the supporting manualIf wiring between the main and interface boards passes, the interface board is replaced first, then the main board.
Read the supporting manualE86 is a selection-table mismatch; E87 is the processor itself. Same test.
Read the supporting manualIt may stop selection or cycles. Avoid repeated restarts.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.2 (Washer Error Codes)
Row 87 of the washer sheet: test 11.
The sheet names no cause, so we do not either. Moisture on a console is still worth wiping off with the power unplugged.
No. The sheet marks it as not shown, so you may only notice dead buttons or a stopped cycle.
The sheet treats it as technician work and the part must match the washer's configuration, so leave it to a visit.
Give us the model number, whether the buttons respond and whether the washer showed any other code.
Codes, symptoms, parts and service
E91 is a user interface protocol incongruence error on Electrolux's 2018 washer sheet: the console and the main board are not speaking the same protocol. The display shows it. Power-cycle once, then book a technician for the interface board test.
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.