Electrolux washer E9E / Control board

Electrolux washer
error E9E

Washer / display reference

E9E means a touch sensor on the user interface is not responding, per Electrolux's 2018 washer sheet. The display does not show E9E. Dry the panel, power-cycle once, and book a technician; the sheet reseats a connector between the interface boards.

Also shown as E9E

Last reviewed

Washer / display reference
Meaning
E9E means a touch sensor on the user interface is not responding, per Electrolux's 2018 washer sheet. The display does not show E9E. Dry the panel, power-cycle once, and book a technician; the sheet reseats a connector between the interface boards.
Who handles it
Technician
Related codes
Source
Washer Tech Data Sheet, A11200302 (1803)

What Electrolux washer E9E means.

What it means

E9E means a touch sensor on the user interface is not responding, per Electrolux's 2018 washer sheet. The display does not show E9E. Dry the panel, power-cycle once, and book a technician; the sheet reseats a connector between the interface boards.

What you can safely check

Wipe the touch surface with a dry cloth.

When to call a technician

A touch zone stays unresponsive after drying and a restart.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux washer E9E: Front-load washer with the top cover raised, showing a green control board with wiring beside the detergent drawer; the cord lies unplugged
    Illustration. Follow your model’s instructions.
    Before you begin

    Dry the panel and your fingers

    Wipe the touch surface with a dry cloth. Moisture or detergent film can stop a touch sensor from reading.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Try each touch zone

    Touch each control once, firmly, and see whether any area is dead. Note which one.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle the washer

    Unplug for a minute, plug back in and try again.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Don't pry at the panel

    The sheet's fix is to unplug and re-seat a connector between interface boards, which means opening the console. That is for a technician.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    If a dead zone stays dead, the satellite board is replaced after the connector is re-seated.

Still showing E9E?

Send us the model and the checks you have done, and open your request here.

Book a visit

The control and its sensors.

Conceptual Washer sectionControl panelControl boardLevel sensorMotor wiring1234
  1. 1Control panel
  2. 4Motor wiring

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

A little more context.

What does E9E mean?

A touch sensor on the control panel is not answering the main board. The sheet reads touch sensor on user interface not responding and does not show it on the display.

Read the supporting manual

What is test 20?

Unplug and re-seat the connector between the user interface boards. If the problem persists, replace the user interface satellite board.

Read the supporting manual

Does E9E mean the whole panel is dead?

Not necessarily. It names a touch sensor, so one area can fail while the rest works.

Read the supporting manual

Can I keep washing?

If the buttons you need still work, yes. If Start or Power is dead, the washer is unusable.

Read the supporting manual

The manual behind the message.

Manufacturer document

Washer Tech Data Sheet, A11200302 (1803)

Electrolux (technician sheet; retailer-hosted copy)

A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.2 (Washer Error Codes)

Row 9E of the washer sheet: test 20, the touch interface satellite board.

Here to help

Good questions.
Clear answers.

Talk to our team
Can a wet hand cause E9E?

Moisture on a touch panel can disturb sensing. Dry the surface before you conclude anything is broken.

Does E9E show on the display?

No. The sheet marks it as not shown, so look for the stored error if a touch zone is dead.

Is the satellite board expensive?

We give no price here. A technician confirms the part on the visit.

What should I tell the technician?

The model number and which touch zones did not respond.

Let’s take care of it.

Premium appliances deserve
careful service.