Electrolux dishwasher i20 / Drain

Electrolux dishwasher
error i20

Dishwasher / display referencei20

A dishwasher showing i20 failed to drain properly. Work through the drain path: disposer knockout plug removed, hose clear and unpinched and at least 32 inches above the floor, glass trap free of food. Then clear the code by holding Cancel, cycling the breaker, or unplugging for three minutes.

Also shown as i20

Last reviewed

Dishwasher / display referencei20
Meaning
A dishwasher showing i20 failed to drain properly. Work through the drain path: disposer knockout plug removed, hose clear and unpinched and at least 32 inches above the floor, glass trap free of food. Then clear the code by holding Cancel, cycling the breaker, or unplugging for three minutes.
Who handles it
Owner checks first, then a technician
Related codes
Source
Dishwasher Error Code i20 - Unit did not drain properly

What Electrolux dishwasher i20 means.

What it means

A dishwasher showing i20 failed to drain properly. Work through the drain path: disposer knockout plug removed, hose clear and unpinched and at least 32 inches above the floor, glass trap free of food. Then clear the code by holding Cancel, cycling the breaker, or unplugging for three minutes.

What you can safely check

Before handling the drain hose or lifting out filter parts, unplug the machine or turn off its breaker.

When to call a technician

i20 returns after the plug, hose, height and glass trap are all right.

Your checklist, kept on this device

Safe checks, in order.

0 of 6 checks done
  1. Electrolux dishwasher i20: Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Before you begin

    Cut the power before reaching in

    Before handling the drain hose or lifting out filter parts, unplug the machine or turn off its breaker.

  2. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 2

    Check the knockout plug

    With a garbage disposer in the loop, the plug inside the disposer inlet must be knocked out for the dishwasher to drain into it.

  3. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 3

    Check the drain hose

    It must not be blocked, obstructed, pinched or restricted.

  4. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 4

    Check the hose height

    The article asks for a minimum of 32 inches from the floor.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Rinse the glass trap and filter

    Clear any food soil from the glass trap and filter.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Reset and rerun

    Choose any one of the three resets, then run a brief cycle to see if the tub empties.

Still showing i20?

Send us the model and the checks you have done, and open your request here.

Book a visit

Where a leak is caught.

Conceptual dishwasher sectionTub seam / gasketBase panFloat switchInlet valve1234
  1. 1Tub seam / gasket
  2. 2Base pan
  3. 3Float switch
  4. 4Inlet valve

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Hand using a flat screwdriver to pry the round plug from the side inlet of a garbage disposer, power cord unplugged on the cabinet floor

Component reference

Disposer knockout plug

The knockout plug is a blank that seals the garbage disposer inlet until it is removed, which has to happen when the dishwasher drains through a disposer.

Read the definition
Ribbed gray drain hose looping up to a cabinet clip and down to a clamped connection on the sink drain under a kitchen sink

Component reference

Dishwasher drain hose

The drain hose carries wastewater away from the tub.

Read the definition
Hands lifting a cylindrical mesh filter with food debris out of the bottom of a wet stainless dishwasher tub

Component reference

Glass trap and filter

The glass trap and filter collect food soil before the drain.

Read the definition

A little more context.

What does i20 mean?

The dishwasher is not draining properly. The article gives four things to check: the disposer knockout plug, hose blockage, hose pinching and hose height.

Read the supporting manual

How do I reset it?

Three options appear in the article: hold Cancel, turn the machine off at the breaker, or pull the plug for three minutes.

Read the supporting manual

How is i20 different from i40?

i40 blames a clogged filter or sump, a narrower finding, while i20 also puts the drain hose and the disposer joint under suspicion.

Read the supporting manual

The manual behind the message.

Manufacturer document

Dishwasher Error Code i20 - Unit did not drain properly

Electrolux / Owner Center knowledge base (owner.electrolux.com)

Owner Center article, fetched 10.11.2026 (no edition date printed) / Article text

Manufacturer document

Dishwasher Error Code i40 - Clogged filter or sump

Electrolux / Owner Center knowledge base (owner.electrolux.com)

Owner Center article, fetched 10.11.2026 (no edition date printed) / Article text

Electrolux Owner Center articles 1830367 (i20) and 1831281 (i40). No model line is named.

Here to help

Good questions.
Clear answers.

Talk to our team
Why is water standing in the tub?

That is what i20 describes, so the drain path is where to look first.

What is a knockout plug?

It is the plug in a garbage disposer inlet that must be removed for a dishwasher drain hose to connect. The article lists it as a first check.

What if the hose is high enough and clear?

Clean the glass trap, reset, and run again. If i20 returns, book a visit for the drain pump and drain path.

Is it fine to keep running it?

Standing water smells and can slop out when the door opens, so sort the drain before the next load.

Let’s take care of it.

Premium appliances deserve
careful service.