Electrolux dryer NO GAS / Heating

Electrolux dryer
error NO GAS

Dryer / display referenceNO GAS

NO GAS on an Electrolux gas dryer means the install cycle found no gas connection, or a closed gas valve. A gas smell overrides everything below: get out first. Otherwise open the supply valve, check the line is connected, then run the install cycle again.

Also shown as NO GAS

Last reviewed

Dryer / display referenceNO GAS
Meaning
NO GAS on an Electrolux gas dryer means the install cycle found no gas connection, or a closed gas valve. A gas smell overrides everything below: get out first. Otherwise open the supply valve, check the line is connected, then run the install cycle again.
Who handles it
Technician — close the water supply
Related codes
Source
Use & Care Guide, Wave-Touch Front-Load Gas & Electric Dryer, 137018100

What Electrolux dryer NO GAS means.

What it means

NO GAS on an Electrolux gas dryer means the install cycle found no gas connection, or a closed gas valve. A gas smell overrides everything below: get out first. Otherwise open the supply valve, check the line is connected, then run the install cycle again.

What you can safely check

A smell of gas means no flames, no switches and no phone calls indoors.

When to call a technician

NO GAS returns with the valve open and the line connected.

Your checklist, kept on this device

Safe checks, in order.

0 of 4 checks done
  1. Electrolux dryer NO GAS: Gas dryer with its lower front panel removed, showing the burner housing, gas valve and a small igniter probe, with the power plug lying on the floor.
    Illustration. Follow your model’s instructions.
    Before you begin

    Smell gas? Stop

    Light nothing, touch no switches and use no phone inside the building. Everyone leaves; the gas supplier is rung from a neighbor's phone, as Electrolux instructs.

  2. Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check the gas shutoff valve

    Make sure the supply valve to the dryer is open.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Check the connection

    The guide says the code means no connection between the dryer and the gas line.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Repeat the install cycle

    Run it again once corrections are made. It is under set prefs.

Still showing NO GAS?

Send us the model and the checks you have done, and open your request here.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 3Drum

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

A little more context.

What does NO GAS mean?

The install cycle could not find a connection between the dryer and the gas line, or the valve is closed. It applies to gas models only.

Read the supporting manual

How do I re-run the install cycle?

Pick INSTALL CYCLE in set prefs and follow the prompts, with the drum empty. The guide says to repeat it when corrections are done.

Read the supporting manual

Why will a gas dryer not heat?

The guide's table lists the gas supply valve not being open, too little air for the burner flame and an empty LP tank or a utility interruption.

Read the supporting manual

The manual behind the message.

Manufacturer document

Use & Care Guide, Wave-Touch Front-Load Gas & Electric Dryer, 137018100

Electrolux

137018100 (PDF dated 2008) / PDF p.26 (INSTALL CYCLE) and p.3 (If you smell gas)

Manufacturer document

Use & Care Guide, Wave-Touch Front-Load Gas & Electric Dryer, 137018100

Electrolux

137018100 (PDF dated 2008) / PDF p.34 (Troubleshooting)

Electrolux Wave-Touch front-load gas and electric dryer Use & Care Guide 137018100. NO GAS shows during the install cycle on gas models only.

Here to help

Good questions.
Clear answers.

Talk to our team
Is NO GAS an electrical error?

No. It is a gas-side install message.

Can I open the valve myself?

Opening the supply valve is in the guide's checks. Connecting or repairing the line is installer work.

What is CALL SERVICE?

The guide says that message can only be corrected by a qualified technician.

Which situation calls for a technician?

A valve that is open, a line that is connected, and a NO GAS message that still comes back.

Let’s take care of it.

Premium appliances deserve
careful service.