What it means
F46 means the cooling fan speed is too high on Electrolux's modular wall oven control. The ES630 prints F44 for the same condition. Check for an obstruction in the air path, then book a technician.
Electrolux oven F46 / Cooling fan
F46 means the cooling fan speed is too high on Electrolux's modular wall oven control. The ES630 prints F44 for the same condition. Check for an obstruction in the air path, then book a technician.
Also shown as F46
F46 means the cooling fan speed is too high on Electrolux's modular wall oven control. The ES630 prints F44 for the same condition. Check for an obstruction in the air path, then book a technician.
The sheet's first step is a mechanical obstruction in the air path.
F46 returns.
Your checklist, kept on this device

The sheet's first step is a mechanical obstruction in the air path. Check that nothing blocks the vent.

A fan that sounds unusually fast or loud is worth noting.

Flip the oven breaker off for half a minute, then back on.

The cooling fan sits behind the oven's panels and its supply is line voltage. Leave panel work to a technician.

The sheet replaces the cooling fan, then the oven control.
Send us the model and the checks you have done, and open your request here.
Book a visit
A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Component reference
The cooling fan keeps the oven’s outer cabinet from overheating.
Read the definitionThe cooling fan is running faster than the control expects.
Read the supporting manualCheck for a mechanical obstruction in the air path, replace the cooling fan, then replace the oven control.
Read the supporting manualF45 is a fan that is too slow; F46 too fast.
Read the supporting manualSame condition, different control: F44 is on the ES630.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
Models: EI30EW38TS
p/n A00980644 Rev A (2017/05) / PDF p.2
Row F46 of the 2017 modular-control sheet, modular oven controls.
Not until the fan has been checked. The cooling fan protects the electronics from heat, and a fan running too fast may point to an obstruction.
The ES630 sheet notes blockage in the airflow can make the fan turn faster; the modular sheet lists an obstruction first.
The sheet lists no wiring step for F46. It replaces the cooling fan after the obstruction check and then the oven control.
For F46, the model number and what the fan sounds like, for example louder or higher-pitched than before.
Codes, symptoms, parts and service
F45 means the cooling fan speed is too low on Electrolux's modular wall oven control. The ES630 prints F43 for the same condition. Check the fan blades are not blocked, then book a technician.
The written Electrolux articles say little about setting the clock or timer, since its display-settings guide is a video. What they do cover is a display or keypad that acts up: a stuck key (F11), memory and cable errors (F13, F14, F15), Demo mode and a power reset.
The cooling fan keeps the oven’s outer cabinet from overheating. The ES630 sheet reads its speed through a tachometer: F43 means too slow and F44 too fast. The 2017 modular sheet uses F45 for too low and F46 for too high.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.