Electrolux washer E86 / Control board

Electrolux washer
error E86

Washer / display reference

E86 on Electrolux's 2018 washer sheet is an incorrect user interface selection table: the control panel and main board disagree about the available options. The display does not show E86. Book a technician; the sheet checks the panel wiring.

Also shown as E86

Last reviewed

Washer / display reference
Meaning
E86 on Electrolux's 2018 washer sheet is an incorrect user interface selection table: the control panel and main board disagree about the available options. The display does not show E86. Book a technician; the sheet checks the panel wiring.
Who handles it
Technician
Related codes
Source
Washer Tech Data Sheet, A11200302 (1803)

What Electrolux washer E86 means.

What it means

E86 on Electrolux's 2018 washer sheet is an incorrect user interface selection table: the control panel and main board disagree about the available options. The display does not show E86. Book a technician; the sheet checks the panel wiring.

What you can safely check

Unplug the washer for a minute, then plug it back in.

When to call a technician

E86 returns, or buttons stop responding.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux washer E86: Front-load washer with the top cover raised, showing a green control board with wiring beside the detergent drawer; the cord lies unplugged
    Illustration. Follow your model’s instructions.
    Before you begin

    Cycle the power

    Unplug the washer for a minute, then plug it back in. Configuration mismatches sometimes show up once after a power event.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Press each button

    Check that every key on the panel responds and none sticks.

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Remember any recent repair

    If a panel or board was replaced recently, say so. A wrong part would cause exactly this.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Read the stored error

    Ten seconds after power on, hold Temp and Select for three seconds.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    Test 11: wiring between the main board and the user interface board, then the interface board, then the main board.

Still showing E86?

Send us the model and the checks you have done, and open your request here.

Book a visit

The control and its sensors.

Conceptual Washer sectionControl panelControl boardLevel sensorMotor wiring1234
  1. 1Control panel
  2. 4Motor wiring

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

White front-load washer seen straight on, with a small silver dial and lit indicator dots on the top console, between wood cabinets

Component reference

Washer main control board

The main control board runs an Electrolux front-load washer and talks to the user interface and the motor control.

Read the definition

A little more context.

What does E86 mean?

The user interface board is using a selection table that does not match the one the main board expects. The sheet calls it incorrect UI selection table.

Read the supporting manual

Why does the wiring matter?

Test 11 treats it as a communication problem. If the wiring between the main board and the user interface board is bad it is corrected; if good the interface board is replaced, then the main board.

Read the supporting manual

The manual behind the message.

Manufacturer document

Washer Tech Data Sheet, A11200302 (1803)

Electrolux (technician sheet; retailer-hosted copy)

A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.2 (Washer Error Codes)

Row 86 of the washer sheet: test 11 (main board to user interface wiring).

Here to help

Good questions.
Clear answers.

Talk to our team
What is a selection table?

The list of cycles and options the panel offers, which the main board must match.

Can wrong parts cause it?

A mismatched interface board or main board is a plausible cause, though the sheet does not state it for E86.

Does E86 show on screen?

No. For E86 the sheet's display column says no, so you would see unusual panel behavior or recall the stored code.

Before booking E86, what helps?

For E86, the model number and whether any board or control panel was replaced before. A part from another washer fits this code.

Let’s take care of it.

Premium appliances deserve
careful service.