What it means
H3 or B3 is listed as supply voltage too high, the same wording as H2/B2, on Electrolux's 2018 washer sheet. The display shows it. Unplug the washer and book a technician; test 18 checks the supply under load first.
Electrolux washer H3/B3 / Power supply
H3 or B3 is listed as supply voltage too high, the same wording as H2/B2, on Electrolux's 2018 washer sheet. The display shows it. Unplug the washer and book a technician; test 18 checks the supply under load first.
Also shown as H3/B3
H3 or B3 is listed as supply voltage too high, the same wording as H2/B2, on Electrolux's 2018 washer sheet. The display shows it. Unplug the washer and book a technician; test 18 checks the supply under load first.
Leave it off until the supply has been checked.
H3 or B3 remains after a restart.
Your checklist, kept on this device

Leave it off until the supply has been checked.

Write down whether the display shows H3 or B3, and whether you also saw H2 or B2.

If a large appliance shares the circuit, tell us. The sheet checks voltage under load.

The plug should be tight and cool. A hot plug is a reason to stop.

Test 18: supply under load, power wiring, wiring to the motor board, then the main board.
Send us the model and the checks you have done, and open your request here.
Book a visitA simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.
The sheet describes it as supply voltage too high (incoming voltage), with display notification yes.
Read the supporting manualIt gives the same description for both and does not say what separates them. We leave the difference unstated rather than invent one.
Read the supporting manualCheck the power in under load and correct any supply or branch-circuit problem; then check the power wiring to the main board and the motor board for a short; then replace the main board.
Read the supporting manualTreat it as a reason to stop using the washer until it has been checked.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
A11200302 (1803); 2018, 300/400/500/600 series (EFLS527UTT and EFLS627UTT copies are byte-identical) / p.2 (Washer Error Codes)
Row H3/B3 of the washer sheet: shown on the display; same test as H2/B2.
The sheet does not rank them. Both point to the same test.
Yes. A board that misreads the supply is the last item in the test.
Yes. The sheet's display column says yes for H3/B3, so the washer tells you about a supply it considers too high.
The model, the exact code characters and any flicker or tripped breaker.
Codes, symptoms, parts and service
H2 or B2 means the supply voltage is too high, according to Electrolux's 2018 washer sheet. The display shows it. Unplug the washer and book a technician; the sheet has the incoming voltage checked under load first.
A washer that will not spin is most often reacting to an unbalanced or heavy load, a machine that is out of level, or a door that is not locked. Electrolux's sheet ties the motor-speed codes E55 and E59 to the motor, belt, tub bearings and motor control board.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.