What it means
E61 is a heater relay failure on Electrolux's dryer chart: a heater relay is stuck open or closed, or the wiring is defective. If the dryer runs without heat, or heats when it should not, unplug it and book a technician.
Electrolux dryer E61 / Heating
E61 is a heater relay failure on Electrolux's dryer chart: a heater relay is stuck open or closed, or the wiring is defective. If the dryer runs without heat, or heats when it should not, unplug it and book a technician.
Also shown as E61
E61 is a heater relay failure on Electrolux's dryer chart: a heater relay is stuck open or closed, or the wiring is defective. If the dryer runs without heat, or heats when it should not, unplug it and book a technician.
A relay stuck open means no heat; stuck closed means heat when it should not be.
The drum gets hot with the cycle stopped, or E61 returns with no heat.
Your checklist, kept on this device

A relay stuck open means no heat; stuck closed means heat when it should not be. Tell us which you saw.

If the drum gets hot with the cycle stopped, cut the power at the plug or breaker.

Electrolux's no-heat article says Air Fluff or a no-heat temperature tumbles without warmth, so rule that out. [2]

An electric dryer uses two breakers or fuses. If one has tripped, the drum may turn without heat. [2]

The chart checks relays RL5, RL6 and RL7 for shorts, then for open circuits, then replaces the control board.
Send us the model and the checks you have done, and open your request here.
Book a visit


A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Component reference
A heater relay is the switch that sends power to the dryer’s heating element.
Read the definitionA heater relay is not switching correctly. The chart's condition is heater relay stuck open or closed, or defective wiring.
Read the supporting manualWith the cycle stopped, whether L1 is applied at the relay outputs (J5-2, J7-1, J7-3), and whether there is an open circuit at the relay connections (J5-1, J5-3, J7-2). If the wiring is fine, the control board is replaced.
Read the supporting manualNo. Electrolux lists tripped house breakers, cycle choice and, on gas models, the gas supply as causes of a dryer that turns without heating.
Read the supporting manualIt can keep the heater on when it should not be, so unplug the dryer and do not leave it running.
Read the supporting manualManufacturer document
Electrolux (technician sheet; retailer-hosted copy)
P/N 137265000B (1202); Canadian SKU EIMED6CJIW; original file dated 2009 / sheet p.1 (Error Code Chart)
Manufacturer document
Electrolux / Owner Center knowledge base (owner.electrolux.com)
Owner Center article, cached 10.11.2026 (no edition date printed) / article text
Row E61 of the dryer chart and Electrolux's no-heat article (KB 1853007).
E61 can be the reason, but check the two house breakers and the cycle setting first. They are the free checks. [2]
No. E64 is an open heater circuit, found by checking the heater coils.
The chart does not separate them for E61. Gas models add checks such as the gas valve. [2]
The model, gas or electric, and whether the dryer heated, stayed cold or stayed hot.
Codes, symptoms, parts and service
E64 is an open circuit in the heater on Electrolux's dryer chart: the heating element or its wiring is defective. The dryer may tumble with no heat. Check the cycle and the breakers, then book a technician.
Most dryer noise has a simple source: coins or buckles in the drum, a loose pedestal, shipping bolts still in place or a dryer that is out of level. Electrolux also lists sounds that are normal, such as the chime at the end of a cycle.
A heater relay is the switch that sends power to the dryer’s heating element. Electrolux’s dryer sheet ties E61 to it: the relay stuck open or closed, or the wiring around it defective. A technician tests it with the cycle stopped.
Book a diagnostic for your model at the appliance.
Office details and the access information to pass on.