Model-specific code library
Electrolux dryer Control board codes
6 printed codes in this group: E91, E92, E93, E94, E97, EF8.

Control board codes
E91 is a communication error between the dryer's control board and its interface board, per Electrolux's dryer chart. The cause is the wiring, the control board or the interface board. Restart once, then book a technician.
TechnicianE92 means the dryer's control board and interface board use incompatible protocols, per Electrolux's dryer chart. The solution is to check that the correct interface board and console are fitted and replace the wrong hardware. Book a technician.
TechnicianE93 is a machine configuration checksum error on Electrolux's dryer chart: the wrong configuration data was loaded, or the interface board, control board or wiring is defective. Book a technician; the chart replaces the interface board and/or console.
TechnicianE94 is a cycle configuration checksum error on Electrolux's dryer chart: wrong configuration data was loaded or the electronic control board is defective. The solution is to replace the control board. Book a technician.
TechnicianE97 is a program mismatch on Electrolux's dryer chart: the wrong configuration data was loaded or the electronic control board is defective. The solution is to replace the control board. Book a technician.
TechnicianEF8 means a key is stuck on Electrolux's dryer chart. A console button or the interface board is reporting a press that does not end. Check that no button is jammed, power-cycle once, and book a technician if it returns.
Owner checks first