Model-specific code library
Electrolux dryer Sensors codes
6 printed codes in this group: E31, E32, E71, E72, E73, E74.

Sensors codes
E31 means the dryer's contact sensor reads a frequency that is too high, per Electrolux's dryer chart. Empty the drum and look for anything lodged against the sensor. If E31 returns with a clear drum, book a technician.
TechnicianE32 means the dryer's contact sensor reads a frequency that is too low, per Electrolux's dryer chart. Look for anything lodged against the sensor and wipe the strips; if E32 returns, book a technician.
Owner checks firstE71 means the outlet control thermistor is open circuit, per Electrolux's dryer chart. A technician checks its resistance, which should be 4.9K to 6.2K ohms at room temperature, and the wiring. Book a visit; the dryer may stop or misjudge heat.
TechnicianE72 means the outlet control thermistor is shorted, per Electrolux's dryer chart. A technician checks its resistance, which should be 4.9K to 6.2K ohms at room temperature, and the wiring for a short. Book a visit.
TechnicianE73 means the inlet control thermistor is open circuit, per Electrolux's dryer chart. A technician checks its resistance, which should be 47K to 66K ohms at room temperature, and the wiring. Book a visit.
TechnicianE74 means the inlet control thermistor is shorted, per Electrolux's dryer chart. A technician checks its resistance, which should be 47K to 66K ohms at room temperature, and the wiring for a short. Book a visit.
Technician