Electrolux dryer E71 / Sensors

Electrolux dryer
error E71

Dryer / display reference

E71 means the outlet control thermistor is open circuit, per Electrolux's dryer chart. A technician checks its resistance, which should be 4.9K to 6.2K ohms at room temperature, and the wiring. Book a visit; the dryer may stop or misjudge heat.

Also shown as E71

Last reviewed

Dryer / display reference
Meaning
E71 means the outlet control thermistor is open circuit, per Electrolux's dryer chart. A technician checks its resistance, which should be 4.9K to 6.2K ohms at room temperature, and the wiring. Book a visit; the dryer may stop or misjudge heat.
Who handles it
Technician
Related codes
Source
Dryer Tech Data Sheet, P/N 137265000B (1202)

What Electrolux dryer E71 means.

What it means

E71 means the outlet control thermistor is open circuit, per Electrolux's dryer chart. A technician checks its resistance, which should be 4.9K to 6.2K ohms at room temperature, and the wiring. Book a visit; the dryer may stop or misjudge heat.

What you can safely check

Does the dryer shut off early or run hot?

When to call a technician

E71 returns or the dryer ends cycles early.

Your checklist, kept on this device

Safe checks, in order.

0 of 5 checks done
  1. Electrolux dryer E71: Gloved hand holding a small metal temperature probe with white wires near the exhaust opening inside a dryer's front edge, a metal strip below.
    Illustration. Follow your model’s instructions.
    Before you begin

    Note the symptoms

    Does the dryer shut off early or run hot? The outlet thermistor tells the control the exhaust air temperature.

  2. Dryers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Clean the lint screen

    A clean screen keeps airflow normal while you wait for the visit. [2]

  3. A dark glass touch panel on a white front-load dryer, the display unlit
    Illustration. Follow your model’s instructions.
    Check 3

    Don't pull the connector

    Pulling or bending the thermistor wire can damage it, so leave the connector in place for the technician to test.

  4. Technician in navy coveralls holding a tablet with a blank checklist, a washer in the background.
    Illustration. Follow your model’s instructions.
    Check 4

    Recall the last error

    Wake with any button but Cancel, then hold Cancel and Start/Pause together for 6 seconds.

  5. A technician inspecting a front-load washer pump filter
    Illustration. Follow your model’s instructions.
    Check 5

    Book a visit

    The chart measures the thermistor against 4.9K to 6.2K ohms and replaces the thermistor and/or wiring.

Still showing E71?

Send us the model and the checks you have done, and open your request here.

Book a visit

Heat and its safety limits.

Conceptual Dryer sectionHeaterThermostat / fuseDrumControl1234
  1. 3Drum

A simplified drawing, since layouts differ between models. Pick an outlined part for its photo and the related check.

Parts behind the message.

Black multimeter probe on a wood bench beside two small bead sensors with thin red and white wires.

Component reference

Dryer control thermistor

Control thermistors are the temperature sensors that tell the dryer how hot the air is.

Read the definition
Hand holding a gray plastic dryer lint screen covered with a thin layer of gray lint, with a white dryer behind it

Component reference

Dryer lint screen (lint filter)

The lint screen, also called the lint filter, catches lint from the air leaving an Electrolux dryer.

Read the definition

A little more context.

What does E71 mean?

The outlet control thermistor reads as an open circuit. The chart names the thermistor or its wiring as defective.

Read the supporting manual

What number should the thermistor show?

Between 4.9K and 6.2K ohms at room temperature, 68 to 77 degrees F (20 to 25 C). An open circuit reads far higher.

Read the supporting manual

How is E71 different from E72?

E72 is a short across the same thermistor. Both have the same resistance range and the same fix.

Read the supporting manual

Is E71 safe to ignore?

The thermistor protects against overheating. Without a good reading the control may not cut heat when it should.

Read the supporting manual

The manual behind the message.

Manufacturer document

Dryer Tech Data Sheet, P/N 137265000B (1202)

Electrolux (technician sheet; retailer-hosted copy)

P/N 137265000B (1202); Canadian SKU EIMED6CJIW; original file dated 2009 / sheet p.2 (Error Code Chart)

Manufacturer document

Dryers - How often do I need to clean my dryer or the lint screen/filter to optimize my drying performance? (KB 1847456)

Electrolux / Owner Center knowledge base (owner.electrolux.com)

Owner Center article, cached 10.11.2026 (no edition date printed) / article text

Row E71 of the dryer chart, page 2.

Here to help

Good questions.
Clear answers.

Talk to our team
What does the outlet thermistor do?

It senses the temperature of the air leaving the drum, which the control uses to regulate heat.

Is E71 the same as E73?

No. E73 is the inlet thermistor, a different sensor with a different resistance range.

Could lint cause E71?

The chart names only the thermistor or its wiring for E71. Lint on its own is not listed, though a clean screen is good practice.

Before booking E71, what helps?

For E71, the model number and whether drying times have changed lately or cycles have been ending early.

Let’s take care of it.

Premium appliances deserve
careful service.