E65 means the high limit thermostat has tripped too many times, per Electrolux's dryer chart. The chart lists a restricted vent first, then the thermostat or, on electric models, the inlet thermal limiter. Clean the lint screen and vent, then book a technician.
E65 means the high limit thermostat has tripped too many times, per Electrolux's dryer chart. The chart lists a restricted vent first, then the thermostat or, on electric models, the inlet thermal limiter. Clean the lint screen and vent, then book a technician.
E65 means the high limit thermostat has tripped too many times, per Electrolux's dryer chart. The chart lists a restricted vent first, then the thermostat or, on electric models, the inlet thermal limiter. Clean the lint screen and vent, then book a technician.
What you can safely check
A tripped high limit means the dryer got too hot.
When to call a technician
E65 returns after the lint screen and vent are cleared.
Your checklist, kept on this device
Safe checks, in order.
0 of 5 checks done
Illustration. Follow your model’s instructions.
Before you begin
Unplug and let it cool
A tripped high limit means the dryer got too hot. Wait for the drum to cool before you touch anything.
Illustration. Follow your model’s instructions.
Check 2
Empty the lint screen
Electrolux says to clean the lint screen before or after each load. A clogged screen starves the dryer of air. [2]
Illustration. Follow your model’s instructions.
Check 3
Check the exhaust run
Look for crushed or kinked duct behind the dryer and a blocked outside hood. The chart's own first listed condition is a high vent restriction.
Illustration. Follow your model’s instructions.
Check 4
Don't override a thermal part
Never bridge a thermostat or limiter. They are the dryer's overheat protection.
Illustration. Follow your model’s instructions.
Check 5
Book a visit
The chart checks the inlet thermal limiter on electric models, then the exhaust system, then the high limit thermostat.
Still showing E65?
Send us the model and the checks you have done, and open your request here.
On an electric model, the inlet thermal limiter for continuity. If it is open, the technician looks for evidence of a high-temperature event and damage before replacing it.