Model-specific code library
Electrolux oven Communication codes
7 printed codes in this group: F20, F22, F23, F25, F27, F28, F29.

Communication codes
F20 means the oven controller has found a problem with the link to the surface element controller (ESEC). It appears on the dual-fuel range sheet. Check whether the surface element displays light; if not, the controller has no power. Then book a technician.
TechnicianF22 is a communication failure between the oven user interface board and the oven relay board, on Electrolux's modular wall oven control. Leave the oven without power for 30 seconds, then restore it. If F22 returns, book a technician for the harness test.
TechnicianF23 is a communication error whose meaning depends on the control. On the ES630 the controller cannot talk to the oven lights control board; on the 2017 modular control the interface board cannot talk to the glass touch panel. Reset power, then book a technician.
Model-dependent / read firstF25 means communication between the user interface and the oven relay board cannot be initiated, on Electrolux's modular wall oven control. The sheet prints it in the same row as F27. Reset power for 30 seconds; if it returns, book a technician.
TechnicianF27 shares its row with F25 on Electrolux's modular wall oven sheet: communication between the user interface and the oven relay board cannot be initiated. Reset power for 30 seconds; if the code returns, book a technician.
TechnicianF28 means communication between the oven user interface and the touch panel cannot be initiated, on Electrolux's modular wall oven control. The sheet prints it in the same row as F29. Reset power for 30 seconds; if it returns, book a technician.
TechnicianF29 shares its row with F28 on Electrolux's modular wall oven sheet: communication between the user interface and the touch panel cannot be initiated. Reset power for 30 seconds; if F29 returns, book a technician.
Technician