Model-specific code library
Electrolux washer Heating codes
7 printed codes in this group: E62, E66, E68, E69, E6A, E71, E74.

Heating codes
E62 on the 2018 Electrolux washer sheet means the wash temperature went too high. The display does not show E62. Stop the cycle, unplug the washer and book a technician; the sheet sends it to the temperature sensor and heater tests.
TechnicianE66 is a heater relay problem on Electrolux's 2018 washer sheet, listed for select models that have an internal heater. The display does not show E66. Unplug the washer and book a technician; the sheet sends E66 to its heater test.
TechnicianE68 means current is leaking to ground from the heater or its wiring, per the 2018 Electrolux washer sheet, for select models. The display does not show E68. Unplug the washer, do not run it again, and book a technician.
TechnicianE69 means the washer heater is open, a broken circuit, on Electrolux's 2018 washer sheet (select models). The display does not show E69. Cold cycles may still run, but hot cycles will not heat, so book a technician for the heater test.
TechnicianE6A is a heater relay sensing problem on the 2018 Electrolux washer sheet (select models): the control cannot read what the heater relay is doing. The display does not show E6A. Choose cold cycles and book a technician for test 14.
TechnicianE71 on the 2018 Electrolux washer sheet is a drum water NTC failure, the temperature sensor for the tub heater, on select models. The display does not show E71. Book a technician; the sheet checks the sensor's resistance, then its wiring.
TechnicianE74 on the 2018 Electrolux washer sheet means the wash temperature does not increase. The display does not show E74. Cold cycles may still run; a technician checks the water temperature sensor and the heater.
Technician