Model-specific code library
Electrolux washer Control board codes
14 printed codes in this group: E83, E86, E87, E91, E92, E93, E94, E97, E98, E9C and 4 more.

Control board codes
E83 is a wrong selector reading on Electrolux's 2018 washer sheet: the control read the cycle selector in a position it does not recognize. The display does not show E83. Turn the selector once and book a technician if it returns.
TechnicianE86 on Electrolux's 2018 washer sheet is an incorrect user interface selection table: the control panel and main board disagree about the available options. The display does not show E86. Book a technician; the sheet checks the panel wiring.
TechnicianE87 is a user interface micro-controller problem on Electrolux's 2018 washer sheet. The display does not show E87. Cycle the power once; if it returns, book a technician for the interface and main board test.
TechnicianE91 is a user interface protocol incongruence error on Electrolux's 2018 washer sheet: the console and the main board are not speaking the same protocol. The display shows it. Power-cycle once, then book a technician for the interface board test.
TechnicianE92 is a user interface mother board protocol incongruence on Electrolux's 2018 washer sheet: the main board reports that the console speaks a different protocol. The display does not show E92. Book a technician for the interface test.
TechnicianE93 is a console or main board control problem on Electrolux's 2018 washer sheet: an incompatible machine configuration. The display shows it. Power-cycle once and book a technician; the sheet checks the wiring between the boards.
TechnicianE94 is a main board control problem, an incompatible cycle configuration, on Electrolux's 2018 washer sheet. The display shows it. Power-cycle once and book a technician; the sheet checks the wiring between the main and motor control boards.
TechnicianE97 is a console or main board control problem, an incompatible cycle configuration, on Electrolux's 2018 washer sheet. The display shows it. Power-cycle once and book a technician for the interface board and wiring test.
TechnicianE98 means the motor control and the main board are incompatible, according to Electrolux's 2018 washer sheet. The display does not show E98. Book a technician; the sheet checks the wiring between the two boards and then replaces boards.
TechnicianE9C is a user interface configuration problem on Electrolux's 2018 washer sheet. The display shows it. Power-cycle once and book a technician; the sheet checks the wiring to the interface board and replaces boards in turn.
TechnicianE9E means a touch sensor on the user interface is not responding, per Electrolux's 2018 washer sheet. The display does not show E9E. Dry the panel, power-cycle once, and book a technician; the sheet reseats a connector between the interface boards.
TechnicianF6 is a control reset on Electrolux's 2018 washer sheet. The display does not show F6. The sheet says to check the wiring to the main board and to unplug the unit for one minute and retry. If F6 returns, book a technician.
TechnicianHE or BE is a control relay failure on Electrolux's 2018 washer sheet. The display does not show HE/BE. Unplug the washer and book a technician; the sheet's test 18 checks the supply, the wiring to the board and then the board.
TechnicianHF or BF is a control relay sense failure on Electrolux's 2018 washer sheet: the control cannot confirm what its relay is doing. The display does not show HF/BF. Unplug the washer and book a technician for test 18.
Technician