Model-specific code library

Electrolux washer Motor codes

10 printed codes in this group: E55, E57, E58, E59, E5A, E5B, E5C, E5D, E5E, E5F.

Rear of a washer with the back panel off showing the motor, belt and wiring plug, while a gloved palm holds two carbon brushes; cord unplugged
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Motor codes

E55

Electrolux's washer sheet reads E55 as motor under speed: the drum is turning more slowly than the control asked. It appears on select models and not on 300 series. Check for a heavy or unbalanced load first, then book a technician.

Technician
E57

E57 is high current on the inverter, the motor control, in Electrolux's 2018 washer sheet. The display does not show E57. Unplug the washer, reduce an overloaded drum if you can, and book a technician for the motor tests.

Technician
E58

E58 is high current on the motor phase in Electrolux's 2018 washer sheet, one of the codes the display does not show. Unplug the washer, take weight out of the drum, and book a technician to test the motor.

Technician
E59

E59 means the control got no spin signal from the motor for 3 seconds. The 2018 Electrolux washer sheet does not show it on the display. Check the load, unplug the washer, and book a technician for test 9.

Technician
E5A

Electrolux's washer sheet prints this as 5A: high temperature on the motor control board from overload. Owners write E5A. Let the washer cool unplugged, lighten the load, and book a technician if it returns.

Technician
E5B

E5B is motor control under voltage on the Electrolux washer sheet, and the display does not show it. The sheet says to check the supply under load and the wiring to the unit. Book a technician for the power checks.

Technician
E5C

E5C means high voltage reached the motor control board, per Electrolux's 2018 washer sheet. The display does not show E5C. Book a technician; the sheet has the power company or a professional check supply voltage and frequency under load.

Technician
E5D

E5D is a communication problem with the motor control, a message that did not arrive, on Electrolux's 2018 washer sheet. The display does not show E5D. Unplug and book a technician; the sheet's test is a wiring check between two boards.

Technician
E5E

E5E is a communication failure coming from the motor control on the 2018 Electrolux washer sheet. The display does not show E5E. Reset the power once; if it returns, book a technician for the board wiring test.

Technician
E5F

E5F means the motor control is continuously resetting, according to Electrolux's 2018 washer sheet. The display does not show E5F. Unplug the washer and book a technician for the wiring and board test.

Technician

Let’s take care of it.

Premium appliances deserve
careful service.